Type 1 (Ultrapure) Milli-Q

Several Millipore water systems are designed to produce ultrapure (Type 1) water. Some can operate directly from tap (potable) water and others from pure water (Elix, RiOs, distilled or DI water).

The selection of the proper ultrapure water system for your laboratory will depend on several parameters such as: feed water available in the laboratory, instant and daily volumes needs of ultrapure water or ultrapure and pure water, the quality of monitoring of water quality and the level of certification required and several other points.

Millipore Applications Specialists are available to discuss with you all these parameters and to help you to design the laboratory water system best adapted to your needs. You can contact them by telephone or by e-mail. See our list of offices.

Ultrapure water directly from tap water feed

• It allows installation of a complete water system in minimum amount of space in any lab with tap water feed
• It eliminates the need for central water purification systems and the associated water delivery loops which may be complex, expensive, difficult to maintain and to extend
• It gives the users of the water system complete control over all water purification steps and the final water quality.

	Milli-Q Integral System For ultrapure (Type 1) water needs up to 200 L/day and pure (Type 2) water needs up to 350 L/day. Learn more...
	Milli-Q Direct 8 and 16 Ultrapure Water System For ultrapure (Type 1) water needs up to 200 L/day and pure (Type 3) water needs up to 350 L/day. Learn more...
	Direct-Q3 Ultrapure Water System For ultrapure (Type 1) water needs up to 10 L/day and pure (Type 3) water needs up to 50 L/day. Learn more...

Ultrapure water from pure water feed

	Milli-Q Advantage For ultrapure (Type I) water needs up to 300 L/day, designed to fit with all laboratory applications (spectrophotometry, chromatography, cell culture or molecular biology) with the convenience of up to 3 different ultrapure water delivery points and water quality specifically tailored to the application. Learn more...
	Q-POD Element For scientists who want to perform ultra trace elemental analysis down to ppt or sub-ppt levels by techniques such as ICP-MS, Millipore had developed the Q-POD Element. Used in conjunction with Milli-Q Integral or Milli-Q Advantage, this new Q-POD allows you to access to another dimension in trace analysis. Learn more...
	Milli-Q Reference For ultrapure (Type I) water needs up to 200 L/d - customized to fit a broad range of research areas while conserving laboratory resources such as time and space. Learn more...
	Milli-Q Academic The Milli-Q Academic system produces water adequate for regular laboratory applications such as the preparation of buffers and solutions for titrations, spectrophotometry or spectroscopy, atomic absorption or emission, ILC,GC. Learn more...
	Synergy Ultrapure Water System For ultrapure (Type I) water needs up to 100 L/day. Learn more...
	ICW3000 Water System Direct Feed Ultrapure Water for Dionex Ion Chromotography Learn more...
	Simplicity Ultrapure Water System For ultrapure (Type 1) water needs up to 5 L/day – a personal system designed to economically replace ultrapure bottled water. Learn more...
	Super-Q For ultrapure (Type I) water needs up to 12,000 L/day – designed for pilot and small process applications. Learn more...

Pod-Pak Consumables

In order to better adapt the ultrapure water quality to the end user needs, Millipore has developed a range of POD-Pak that can be connected at the outlet of the Type 1 water system to provide additional insurance that specific contaminants have been removed from Type 1 water.

	BioPak BioPak for the production of pyrogen-free, nuclease-free and protease-free water Learn more... Brochure: BioPak Point-of-Use Ultrafilter Product Information
	LC-Pak LC-Pak for the removal of trace organics for applications such as UHPLC, LC-MS or LC-MS/MS Learn more... Brochure: LC-Pak Point-of-Use Polisher Product Detail
	EDS-Pak EDS- Pak for endocrine disrupters removals Learn more... Brochure: EDS-Pak Point-of-Use Polisher Product Detail
	VOC-Pak VOC-Pak for volatile organic compounds –free water production Learn more... Brochure: VOC-Pak Point-of-Use Polisher Product Detail
	Millipak Millipak for particulate and bacteria-free water production Learn more... Brochure: Millipak Disposable Filter Units Product Detail

All the above systems can be fed by pure water produced by Millipore Elix or RiOs Water Systems.

Previous Product Ranges

• Purification Packs for Milli-Q Academic, Gradient, Biocel, and Synthesis
• Cartridges for Milli-Q and Milli-RO Bowl-Style Systems
• Purification Packs and Accessories for Compact Systems

<< back to top